Go-FOC SV4----------Base on VESC4 -- Maker-X

Shipping list:
Go-FOC SV4(Includes heat sink)  x   1
XT60+ Plug (Male and female)  x  1
PH2.0MM 6Pin JST wires   x   3
Micro USB data line    x   1
- Hardware: V 4.2

- Firmware: V3.63

- Voltage: 8V - 60V (2S to 12S LiPo safe).

- Current: Continuous 40A

- 5V 1.5A Output

- 3.3V 1A Output

- Mode: DC, BLDC, FOC (sinusoidal)

- Supported sensors: ABI, HALL, AS5047

- Size: Long * Wide * High   76*60*18.5

Measure the current and voltage of 2 phases
- Regenerative braking
- Traction control (single and double settings)
- Sensorless or Sensorless Operations + Mixed Mode
- Configurable RPM, Current, Voltage and Power Limitations
- Input source: PPM, simulation, NRF Nyko Kama Nunchuck
- Communication Port: USB, CAN, UART
- Throttle Curve and Slope of All Input Sources
- Separate acceleration and brake throttle curves
- Seamless Four Quadrant Operation
- Motor speed, ampere hour, watt hour count
- Real-time data analysis and readout through communication ports.

- Adjustable protection:
- Low input voltage
- High input voltage
- High motor current
- High input current
- High regenerative braking current (motor and input limit separately)
- High Speed (Individual Restriction in Each Direction)
- Overtemperature protection (MOSFET and motor)